Fluke 481 Radiation Detection Meter Fluke 481 Radiation Detection Meter The Fluke 481 is a portable and practical means for identifying irradiated goods, and for helping remediate contamination and safety issues while minimally impacting operations. P000146 HVAC IAQ 0 VND Quantity: 1 Cái


  •  
  • Fluke 481 Radiation Detection Meter

  • Post on 22-09-2015 04:13:49 PM - 1031 Views
  • Price: Contact

  • The Fluke 481 is a portable and practical means for identifying irradiated goods, and for helping remediate contamination and safety issues while minimally impacting operations.


Quantity
  • The Fluke 481 Radiation Detection Meter is a portable and practical means for discovering irradiated goods, and for helping remediate contaminant and safety issues while minimally affecting performances. Ideal for detecting irradiated goods, equipment, surfaces or environments in industrial settings, the 481 Radiation Meter helps ascertain worker safety and compliance to federal regulations.

    Use of the Fluke 481 assures employees that radiation dangers are known, monitored and calculated for their security. Whenever radiation is found, a clear and quantifiable result provides handlers to comply with federal guidelines while avoiding unnecessary steps that could stop procedures, impact productivity or lead to missed revenue.

     

  • General Specifications
    Radiation Detected Beta > 100 keV

    Gamma > 7 keV

    Operating Ranges 0 mR/h to 5 mR/h (8 sec)
    0 mR/h to 50 mR/h (2.5 sec)
    0 mR/h to 500 mR/h (2 sec)
    0 R/h to 5 R/h (2 sec)
    0 R/h to 50 R/h (2 sec)
    Accuracy Within 10% of readings between 10% and 100% of full scale indication on any range, exclusive of energy response
    Detector Chamber (cc volume air ionization) 349 cc
    Chamber wall (phenolic) 246 mg/cm²
    Chamber window (mylar) 6.6 mg/cm²
    Beta slide 440 mg/cm²
    Automatic Features Auto-zeroing, auto-ranging, and auto-backlight
    Power Requirements Two 9 V alkaline, 200 hours operation
    Warm-up Time One minute
    Battery Life Four+ hours continuous use per battery pack
    (assumes 50% brightness of LCD)
    Dimensions (W x D x H) 10 x 20 x 15 cm (4 x 8 x 6 in)
    Weight 1.11 kg (2.5 lb)
    Display LCD Analog/Digital With Backlight
    Analog 100 element bar graph 6.4 cm long. Bar graph is divided into 5 major segments, each labeled with the appropriate value for the range of the instrument
    Digital 2.5 digit display is followed by a significant zero digit depending on the operating range of the instrument. The units of measurement are indicated on the display at all times. Digits are 6.4 mm (0.25 in) high. Low battery and freeze indicators are also provided on the display
    Modes
    Integrate Mode Operates continuously 30 seconds after the instrument has been turned on. Integration is performed even if the instrument is displaying in mR/h or R/h
    Freeze Mode Will place a tick mark on the bar graph display to hold on the peak displayed value. The unit will continue to read and display current radiation values
    Environmental
    Temperature Range -4°F to 122°F
    Relative Humidity 0% to 100% (at 140°F)
    Geotropism < 1%
     

 

  Reader Comments

You did not use the site, Click here to remain logged. Timeout: 60 second