Fluke 1587 Insulation Multimeter Fluke 1587 Insulation Multimeter

Two powerful tools in one

The Fluke 1587 Insulation Multimeters combine a digital insulation tester with a full-featured, true RMS digital multimeter in a single, compact, handheld unit, which provides maximum versatility for both troubleshooting and preventative maintenance.

P000209 Insulation Testers 0 VND Quantity: 1 Cái


  •  
  • Fluke 1587 Insulation Multimeter

  • Post on 23-09-2015 09:04:34 AM - 1298 Views
  • Price: Contact

  • Two powerful tools in one

    The Fluke 1587 Insulation Multimeters combine a digital insulation tester with a full-featured, true RMS digital multimeter in a single, compact, handheld unit, which provides maximum versatility for both troubleshooting and preventative maintenance.


Quantity

The Fluke 1587 Insulation Multimeters combine a digital insulation tester with a full-featured, true RMS digital multimeter in a single, compact, handheld unit, which provides maximum versatility for both troubleshooting and preventative maintenance.

Whether you work on motors, generators, cables, or switch gear, the Fluke 1587 Insulation Multimeters are ideally suited to help you with your tasks and at a cost that is far less than buying the two products.

Specifications
Voltage DC Maximum voltage 1000 V
Accuracy ±(0.09% + 2)
Maximum resolution 0.001 V
Voltage AC Maximum voltage 1000 V
Accuracy ±(2% + 3)
AC bandwidth 5 kHz1
1. with low pass filter; 3 db @ 800 Hz
Maximum resolution 0.1 mV
Current DC Maximum amps 400 mA
Amps accuracy ±(0.2% + 2)
Maximum resolution 0.01 mA
Current AC Maximum amps 400 mA
Amps accuracy ±(1.5% + 2)2
2. 1 kHz bandwidth
Maximum resolution 0.01 mA
Resistance Maximum resistance 50 MΩ
Accuracy ±(0.9% + 2)
Maximum resolution 0.1 Ω
Capacitance Maximum capacitance 9,999 µF
Accuracy ±(1.2% + 2)
Maximum resolution 1 nF
Frequency Maximum frequency 100 kHz
Accuracy ±(0.1% + 1)
Maximum resolution 0.01 Hz
Temperature Measurement -40.0°C to 537°C
-40.0°F to 998°F excluding probe
Diode test Range/Resolution 6 V / 1 mV
Accuracy ±(2% + 1)
Insulation Test
Minimum test current @ 1kΩ/V 1 mA
Test Voltages 50, 100, 250, 500, 1000 V
Maximum resistance per test voltage 50 V  
100 V  
250 V  
500 V  
1000 V 2 GΩ
Maximum resolution per test voltage 50 V 0.01 MΩ
100 V 0.01 MΩ
250 V 0.1 MΩ
500 V 0.1 MΩ
1000 V 0.1 MΩ
Accuracy per test voltage 50 V ±(3% + 5)
100 V ±(3% + 5)
250 V ±(1.5% + 5)
500 V ±(1.5% + 5)
1000 V ±(1.5% + 5) to 600 MΩ, ±(10% + 3) above 600 MΩ
Environmental Specifications
Operating temperature –20°C to +55°C
Storage temperature -40°C to +60°C
Humidity (without condensation) 0% - 95% (10°C – 30°C)
0% - 75% (30°C – 40°C)
0% - 40% (40°C – 55°C)
Operating altitude 2000 m
Safety Specifications
Overvoltage category Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 NO. 61010-1-04, and IEC/EN 61010-1 2nd Edition for measurement CAT III 1000 V and CAT IV 600 V
Agency approvals 2000 m CAT III 1000 V, CAT IV 600 V; 3000 m CAT II 1000 V, CAT III 600 V
Mechanical and General Specifications
Size 203 x 100 x 50 mm (with holster)
Weight 624 g
Warranty 3 years
Battery life alkaline Meter use 1000 hours
Insulation test u6se Meter can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off.
IP rating IP40
     

 

  Reader Comments

You did not use the site, Click here to remain logged. Timeout: 60 second