Fluke 718Ex Intrinsically Safe Pressure Calibrator Fluke 718Ex Intrinsically Safe Pressure Calibrator The Fluke 718Ex is a powerful intrinsically safe self-contained portable pressure calibrator for usage in explosion endangered areas. P000281 Pressure Calibrators 0 VND Quantity: 1 Cái


  •  
  • Fluke 718Ex Intrinsically Safe Pressure Calibrator

  • Post on 23-09-2015 10:39:44 AM - 1093 Views
  • Price: Contact

  • The Fluke 718Ex is a powerful intrinsically safe self-contained portable pressure calibrator for usage in explosion endangered areas.


Quantity
Pressure Measurement Accuracy
Fluke 718Ex 30G Range -830 mbar to 2 bar (internal sensor)
Over pressure: 3x FS
Resolution 0.0001 bar
Accuracy 0.05% FS
Functions Zero, Min, Max, Hold, Damp
Fluke 718Ex 100G Range -830 mbar to 2 bar (internal sensor)
Over pressure: 2x FS
Resolution 0.001 bar
Accuracy 0.05% FS
Functions Zero, Min, Max, Hold, Damp
Fluke 718Ex 300G Range -830 mbar to 20 bar (internal sensor)
Over pressure: 375 psi, 25 bar
Resolution 0.0001 bar
Accuracy 0.05% FS
Functions Zero, Min, Max, Hold, Damp
Fluke 718Ex series Range Via pressure module connector 
29 pressure modules, 2.5 mbar to 700 bar 
Over pressure per pressure module specs
Resolution Per pressure module specs
Accuracy To 0.025% of full span, per pressure module specs
Functions Zero, Min, Max, Hold, Damp
Source pressure, built in pump range -820 mbar to full scale
For use with non-corrosive gasses.
Supported Pressure Units psi, inH2O (4°C), inH2O (20°C), kPa, cmH2O (4°C), cmH2O (20°C), bar, mbar, kg/cm², mmHg, inHg
Media compatibility per pressure module specs
Technical Data
Measure accuracy Range 0-24 mA
Resolution 0.001 mA
Accuracy 0.02% rdg ±2 counts
Display LCD, 5 digit pressure and current simultaneous
Environmental Specifications
Operating temperature -10°C to 55°C
Storage temperature -40°C to 60°C
Humidity (without condensation) 95% (10°C to 30°C)
75% (30°C to 40°C)
45% (40°C to 50°C)
35% (50°C to 55°C)
Operating altitude 3,000 m max
Safety Specifications
Safety ATEX II 1G Ex ia IIC T4 compliant
CSA Certification I.S. Class I
Div 1 Groups A-D , T4
Mechanical and General Specifications
Size (L x W x H) 216 x 94 x 66 mm (with holster)
Weight Approx. 992 g (with holster)
Warranty Three years, one year for pump
Shock 1 meter drop test
Vibration Random, 2 G, 5-500 Hz
Battery type One 9-volt alkaline battery ANSI/NEDA 1604A or IEC 6LR619V
Battery life 4 to 20 hours, depending on functions used
     

 

  Reader Comments

You did not use the site, Click here to remain logged. Timeout: 60 second